In a typical shad season I’ll plow through 10 feet of bead chain easy. Handing out handfuls of whatever works combined with those buried into the bottom consumes plenty. It’s the weighting standard for most shad flies because it flips the hook over giving a shot at the upper jaw, traditional hook-ups tear through the sides – which is why so many fish are lost.

Years ago I had the foresight to score about 10 lbs of the silver and gold 3.2mm style, I was tying commercially and winter would bring steelhead orders, summer it’d be shad – and I was burning through a fair amount each year.

This season I’d seen little packs of anodized aluminum beadchain in two or three colors – and the lamp section of Home Depot had a couple pull chains in a nice glossy black – so I figured somebody was making this in quantity.

They are – the assortment is broader than what we’ve seen in fly shops. Many styles are available; brass, stainless steel, bronze, and aluminum – and those can be broken down into additional finishes like black nickel, polished brass, and all the colors of the rainbow.

Fly shops sell the basic chain for $0.10 per inch, and most of the online chain vendors are half that, metal is heavy and large quantities will drive up the postage, but the resulting selection is worth it.

Tungsten and brass beads are expensive – and I’ve often wished I could find the cheaper bead chain in colors suitable for trout flies – as the physics of a weighted nymph suggest if the hook rode up – we’d be losing less of them. With bead chain so much cheaper than tungsten or brass there might be some small economic reward as well.

Enough of a motive to get me to dig through the Internet looking for them…

Regular Silver and Gold are available at Home Depot and Lowe’s – what I needed was the “freak” stuff – the beads we don’t know exist, and would kill for should they ever surface …

I’m just starting to work through the respective vendor offerings – but I saw the above spool and about spewed lunch through my nose. Infinite combinations and colors and all of them yelling “Eat me.”

I’m interested in both brass and aluminum; brass for obvious reasons it’s heavy as can be and cheaper than beads, aluminum because it’s not – and I can envision many uses for both. Shad and steelhead will remain brass, but I can envision stonefly nymphs and lake flies, damsels and dragonflies, where I don’t need the massive sink rate yet could still use weight and the “eye” affect.

Here’s the Olive Mutt that worked so well on the Upper Sacramento last weekend, adapted to the Black beadchain. The fly will ride as shown so it’s tied “upside down” in the vise….

… fish don’t really care which side the wingcase is on – but we sure as hell do – hence the attention to detail.

Tied on a #8 3X long shank, it’ll make a wonderful dragon fly nymph at the same time – in fact, if asked what you’re catching all them fish on I’d call it a dragonfly nymph, it’d scare hell out of all them fellows playing Mayfly-Stonefly-Caddis, and you’re guaranteed they won’t have anything close as they left those in their “lake” box.

… besides, when they see the color and tinsel they’ll think you’re an idjit – everyone knows stoneflies is either brown, black, or golden …

…except us.

These are 25 foot spools of 3.2mm (#6) Brass beadchain – sold by the folks at BallChain.com – available in 19 colors if you include the silver and gold. You may be interested in Mystic Red and Antique finishes they have as well.

Called “Cool Spools” – they show the connector colors but only have violet, rainbow (shown above), black, and dark blue to purchase online. It’s a rather poor web presence – but I called and they mentioned the other colors were available – but not all were in stock.

I’m itching to try the Rainbow for shad – I’m sure the orange would work really well also. I’ll keep looking for a better deal – and the aluminum is already enroute from a different source, we’ll feature that when it arrives. Note the hollow tubes available in similar colors – just right for tube flies; either insert a nylon sleeve or make sure you deburr both ends.